The Model 708 is a standalone stereo generator intended for use with an external FM audio processing system. The composite multiplex signal, including the stereo pilot, is generated with digital synthesis techniques to assure optimum stereo separation without need for calibration adjustments. Additionally, the 708 provides internal combining for one or two SCA or RDS/RBDS subcarriers.

The Model 235 incorporates all audio processing needs for AM broadcasting in a single, easy-to-use package. "Gain-riding" AGC is followed by variable low- and high-frequency EQ, 3-band compression, an asymmetrical, integrated limiter/clipper peak controller, and a low-pass function that satisfies NRSC or other "audio mask" specifications. A rear-panel RS-232 data port allows the processing presets to be programmed or updated by computer or modem; the necessary software is included.

The 718 "DAVID-III" combines comprehensive multiband audio processing with a digital-synthesis stereo generator for unparalleled performance and great value. Pulse-width-modulation (PWM) techniques ensure rock-stable operation and a very competitive, yet effortless sound. Density and equalization adjustments allow the broadcaster to tailor the 'signature' of the on-air sound. Proprietary PIPP* final limiting and an adjustable composite clipper guarantee full carrier modulation for any program audio source or characteristic.

The 261 Utility Processor provides an all-inclusive system for general audio normalization, level management and FM-airchain use. It combines the functions of gated, gain-riding AGC, dynamic range compression and independent broadband and high-frequency program peak limiting. Processing functions may be selected from the front panel separately or combined for comprehensive program audio control. The 261 features AES-digital and L/R analog inputs; digital and analog outputs are available simultaneously. Digital input sample rates are detected automatically, while multiple output sample rates can be easily selected from the front panel. Extra features like alarms and a front panel lockout switch make the 261 a complete package for broadcasters looking for comprehensive level management. 100% digital DSP architecture ensures easy setup, transparent signal path, and unobtrusive menu-driven operation.

The 222 was originally developed as a "post-processor" to ensure US broadcasters' compliance with FCC-mandated occupied-bandwidth regulations. It incorporates a fast, asymmetrical peak limiter, independent pre-emphasis-protection limiting, and a very sharp-cutoff low-pass filter with proprietary overshoot control. The 222 finds ready application in a wide variety of AM broadcast situations. In addition to the NRSC 10kHz cutoff for medium-wave AM broadcasting in the US, any high-frequency protection characteristic between 4.5kHz and 15kHz can readily be accommodated to meet other domestic and overseas needs. Though the 222 is intended to provide basic final limiting, a "floating platform" release characteristic yields sufficient program dynamics compression that often the unit can be run "barefoot" between the console and transmitter with good results.

New Rev 3.0 Firmware as of June 2014! The DAVID IV is the fourth generation processor in our DAVID (vs. Goliath) series of FM and HD Radio air-chain processors. Our streamlined, 100% DSP-based audio engine gives you total leverage over the most important sonic ‘signature’ parameters, while smart controls allow you to enhance program material quickly and effectively. Processing includes 5 bands of dynamics compression with equalization, intelligent gain-riding AGC (Automatic Gain Control), Bass and Stereo Field Enhancements, and our proprietary PIPP™ (Polarity Independent Peak Processing) limiter. The DAVID IV combines a remarkably clean sound with a premium FM Stereo Generator that also includes internal metering with combining for the RDS(RadioData System) subcarrier. Setup is quick, and operation is intuitive via the multi menu front-panel interface or IP based remote control software, so you can make adjustments from the comfort of your favorite listening environment. DAVID IV Remote Control Software DAVID IV Remote Control Software Presets are provided for popular world formats*, and user settings can easily be saved/backed up and shared over station networks. TCP/IP connectivity is virtually automatic and allows full remote control and access from anywhere in the world. Processing and stereo generator aside, the DAVID IV features a rugged closed box design (no fans or heat-sinks needed), with ultra low latency hardware allowing for direct off-air monitoring, and power to live audio in less than 1 second. But how does it sound? When it comes to audio performance, the DAVID IV really delivers. With tight lows, open mids, crisp but controlled highs, and the dynamic flexibility to really stand out, the DAVID IV’s sound promises results on par with products more than double or triple it’s price class. It has never been easier (or more affordable) to achieve maximum audio performance without breaking the budget. But don’t take our word for it, get one and demo it yourself-30 days risk free! *see Features section for a full list of included presets.

The 719-01 HD Radio Delay Board is an optional drop-in accessory for our DAVID IV FM/HD Radio Broadcast Processor. It enables up to 9.999 seconds of audio delay for the Composite (MPX) and/or analog and digital program line outputs. Because there is an obligatory delay of roughly 8 seconds in the digital program encoding and decoding process present in HD Radio, the analog-FM signal must be delayed by this same amount to arrive in sync with the digital signal. This time-aligning “diversity delay,” as it is called, is enabled in the DAVID IV with this optional accessory circuit board that is simply plugged into a header strip on the main board. The delay is adjustable between zero and 9.999 seconds in one-millisecond increments, and once installed, activates new a menu adjustment, using either the front-panel jog wheel or remote PC software. Use of this accessory board requires at least Rev. 2 firmware/software in your accompanying DAVID IV FM/HD Radio Broadcast Processor.

The Flexiva VistaMax™ system serves as the network core of multi-station facilities with demanding requirements for shared resources and on-the-fly changes. The optical hub option extends the connection range to other VistaMax networked devices to up to 2 km. For smaller network needs, Flexiva VistaMax Envoy™ networks four Flexiva RMXdigital® and/or Flexiva NetWave® consoles, expandable to eight studios with an optional, second hub card.

Operating a Flexiva VistaMax™ network has never been easier with VistaVue™ workflow management software. Interfaces are definable for each user to help “goof-proof” signal routing changes, whether the user is switching day-parts, merely changing the background music in an office zone or anything in between. Individual and community macros allow for one-click routing changes, supplementing the scheduled and automated macros.

An elegant interface between Flexiva VistaMax™ digital studio networks and automation computers, the Flexiva VMQuadra™ interface tackles a number of key issues — having a large number of audio channels at each automation computer, the distribution of the computers throughout the facility and the need for bidirectional logic control. With the majority of automation system workstations connected to central servers, the Flexiva VMQuadra interface was designed to reside near the server and provide interconnection with up to four computers. Along with the elimination of costly sound and logic interface cards in automation computers, the Flexiva VMQuadra solution results in simpler, more economical facilities. With its additional ability to interface with nearly every computer, the Flexiva VMQuadra interface is an ideal foundation for new media workflows in the studio. Every desktop and portable computer supporting USB audio, whether running Windows, Mac OS, or Linux, can be connected to your Flexiva VistaMax network.

The Flexiva VMConnect audio management frame makes powerful, flexible Flexiva VistaMax™ digital studio networks an option for radio station operations of all sizes. Based upon, and fully compatible with, Flexiva VistaMax audio management frames, the Flexiva VMConnect system delivers total reliability and performance. The Flexiva VMConnect frame adds a new level of scalability to Flexiva VistaMax networks. In addition to lowering the cost of entry for a new facility, it offers an additional means for adding distributed network connectivity to existing networks with Flexiva VistaMax frames. The optical hub option extends the connection range to other networked devices up to 2 km.

The Flexiva™ VMXpress system harnesses the Flexiva VistaMax™ digital studio network’s provision for both centralized and distributed audio and logic interfaces to best match the individual requirements of radio facilities. It adds a new level of scalability by economically providing physical inputs and outputs that can be located where needed, while allowing easy integration into the overall Flexiva VistaMax network. Adding sources and destinations or networking a previously isolated studio is quickly accomplished with the Flexiva VMXpress interface. Eight different models offer numerous analog and digital audio I/O and logic configurations. Based on individual physical plant and operational needs, users can distribute network connectivity to any room in the facility, increase I/O capacity at a technical core area, or create a secondary hub. Flexiva VMXpress is also ideal for ad-hoc point-to-point applications.

Integrator™ Equipment Racks Broadcast Equipment Rack Cabinets A to D Converter Quad Analog to Digital Converter Headphone Distribution System Headphone Distribution for Radio Systems Talent Control Systems Host Dashboard, Control Panels and Clock/Timer World Feed Panel Audio Signal Connection System

Solve Today’s Challenging Content Transport Requirements Radio engineers face the challenges of managing their broadcast program contribution and distribution and providing the highest degree of on-air reliability, while still controlling their costs. The field-proven Intraplex® AudioLink PLUS™ E1 audio multiplexing system combines bidirectional transport of program audio with a wide variety of other traffic — including LAN/WAN data, telephone, intercom, fax, and remote control data — all over the same link. And the unique transmission robustness and error mitigation features of Intraplex provide users with unmatched reliability. Get a Complete Range of Audio Options — and More The AudioLink PLUS system offers the industry’s widest range of plug-in modules for program audio, voice and data to combine virtually any mix of payload traffic for transport over E1. Program audio options include true uncompressed linear audio for the highest-quality sound and the lowest processing delay. Compressed audio options such as MPEG II, MPEG III, J.41 and Enhanced apt-X® allow you to increase bandwidth efficiency for consolidation of multiple audio channels and other payloads on the same link. Data modules provide one-way or full-duplex data circuits, with a variety of data rates and formats for LAN/WAN, control circuits, program associated data and legacy devices. Voice modules transport voice-grade audio for telephone, inter-com and fax applications. Whether over E1 land lines or microwave radios, the AudioLink PLUS system delivers superior audio quality and efficiency to broadcast stations and networks worldwide. E1 and IP — Built for the Future Intraplex AudioLink PLUS E1 multiplexers can be used in conjunction with Intraplex NetXpress™ IP multiplexers. Together, they allow gradual migration from E1 to IP and enable the deployment of hybrid E1/IP contribution and distribution networks that share a common family of audio interface modules.

The Intraplex® CrossConnect system and CrossConnect server provide routing and switching capabilities for up to six T1 or E1 circuits, as well as automatic backup switching for STL links. The CrossConnect Server also accepts a wide variety of plug-in modules for integrated drop and insert of voice, data and program audio. Station operators can dynamically route services among multiple studio and transmitter locations, sharing programming and administrative resources among geographically separated facilities. CrossConnect Servers reduce transport link requirements, providing cost savings in both point-to-point and point-to-multi-point networks. Broadcasters can mix and match program audio, voice and data feeds among multiple studio and transmitter locations and save on programming, talent and administrative costs by sharing transmission resources among stations. Intraplex CrossConnect Systems and Servers can help ensure the most efficient use of the available transmission capacity and reduce costs. CrossConnect Systems and Servers give users complete flexibility to combine, interconnect, and multicast traffic among up to six T1 or E1 lines.

The next generation of digital STL Our challenge: to design a studio-to-transmitter link (STL) for your most demanding 950 MHz applications — one as reliable and robust as Intraplex® T1 and IP audio links. Digital STL manages much more than audio, so installation and configuration need to be straightforward, not a science project. Data should not be optional, requiring additional boxes and complexity. Your STL should be ready, out of the box, for AM, FM and HD Radio™, as well as future multimedia applications. Earlier digital STLs were not designed for IP data transport. Adding IP data to them required optional modules and external add-ons, and many engineers working on HD Radio installations reported spending much time and money trying to eliminate glitches. Our solution: HD Link™ is designed to manage all HD Radio™ transport scenarios, regardless of where you place your importer and exporter. Its two prioritized Ethernet paths give preference to HD Radio™ data over control and other LAN/WAN data. It supports both UDP and TCP, and even handles the switching of TCP return packets over asymmetric IP paths with plug-and-play simplicity. HD Link offers RF power to spare, an integrated IP gateway with sophisticated data handling capabilities, and multiple channels of audio. The intuitive front panel and remote interfaces tap into the most complete feature set of any microwave STL, yet take less time to configure. It can even operate on both RF and IP simultaneously, and allows automatic backup of all services from one to the other. Intraplex is broadcasting’s first choice for rock-solid, full-time operation of T1 STLs. With HD Link, you can now count on the same dependable performance, superior support and long-term value for your microwave links.

The Intraplex® IP Link family of IP audio codecs provides high-end features at an affordable price. Offering an array of audio coding options, the IP Link codecs are suitable for use in Studio to Transmitter Links (STLs) as well as audio contribution and distribution networks. Support for IP multicast and multiple unicast streams enables one encoder to feed multiple decoders. By incorporating three IP Interfaces that can be used for streaming and management, the IP Link systems can provide a level of reliability not seen in comparably-priced codecs. As the latest addition to the Intraplex family of audio transport products, the IP Link audio codecs bring legendary Intraplex reliability to the IP codec market.

Whether you’re looking for simple one-way audio transport or multichannel FM plus HD Radio™, control data, or off-premises extension telephones, there’s an Intraplex® STL HD package that’s right for you. STL HD is a modular family of products designed to let you customize your T1 STL with exactly the features and circuits you require. The system transports crystal-clear digital audio over any distance or terrain, and can be used on all types of T1 links, including leased telco T1 circuits, microwave, spread spectrum radio and fiber optic. STL HD systems can be equipped to carry one-way or full-duplex stereo audio, with or without compression. STL HD also provides a wide range of data interface options and supports a variety of telephone, intercom, and other voice-grade applications.

Unprecedented Flexibility in IP Audio Transport Intraplex NetXpress LX™ IP audio multiplexer delivers a high-performance IP audio platform in a scaled down, affordable package. Supporting both unicast and multicast, and compatible with the existing NetXpress, the NetXpress LX system opens up new possibilities in IP audio network design. Existing T1/E1 Multiplexer Conversion to IP Forget about retiring perfectly good Intraplex systems when moving from T1 or E1 to IP. The new NetXpress LX IP interface module, the CM-30, can replace the network interface module in existing Intraplex T1/E1 systems, converting them to IP while keeping the existing chassis with all of its audio, voice and data cards. Intraplex Reliability When the mission is critical, broadcasters turn to Intraplex audio transport systems — the standard-bearer for dependable, great-sounding audio links for always-on applications. Built upon the technology of the original NetXpress system, but with a form factor matching that of our T1/E1 systems, the NetXpress LX multiplexer provides the reliable and robust performance demanded by studio-to-transmitter link (STL) and other fixed, full-time inter-facility applications. Available in two sizes — a 3RU frame with capacity for up to 17 application modules and a compact 1RU frame that can hold five application modules — the NetXpress LX system can also work as an “edge” device along with the NetXpress multiplexer in large, multisite networks. The NetXpress LX multiplexer provides the superior support and long-term value expected from Intraplex — broadcasting’s first choice for robust, full-time operation of IP audio, T1/E1 and 950 MHz audio and data links.

A New Level of Performace Intraplex NetXpress™ takes IP audio transport to a new level of performance and reliability. It provides transport over packet-switched networks for a wide range of real-time audio, voice, video and data applications. As the industry’s best platform for professional audio over IP, NetXpress offers system-level resiliency, sophisticated network monitoring and excellent bandwidth management. NetXpress delivers all the quality of Intraplex and all the economy of IP in one solution.

Access Servers IT1/E1 Multiplexers Intraplex® CM-30 IP Network Conversion Card for T1/E1 Multiplexers SynchroCast3™ Multiple Transmitter Simulcast System Program Audio Modules Program Audio Modules for IP/T1/E1 Products Voice/Telephone Modules Voice/Telephone Modules for IP/T1/E1 Products Data Modules Data Modules for IP/T1/E1 Products

The Flexiva NetWave™ networkable digital audio system delivers the extensive features, operational flexibility and robust construction needed for standalone operation in both on-air and production studios, while the slim, desktop styling makes it perfect for news booths, voice tracking and portable applications.

Flexiva Oasis™ is a high-value standalone audio console for on-air and radio production applications. Simply connect microphones, source equipment and audio monitors — even a PC automation channel (no sound card required) — directly into the Flexiva Oasis console and be on the air. Designed with next-generation studio demands in mind, Flexiva Oasis allows facilities to cost-effectively and easily migrate from analog to digital whenever they’re ready. In addition to capabilities for all necessary audio and logic components, Flexiva Oasis provides both analog and digital outputs that enable facilities to connect to modern STLs and studio infrastructures. • Reduced desktop real estate with big performance • Integration with automation enhanced via USB option (single stereo playout and record standard) • Enhanced telco operation, eliminating need for dedicated bus assignments • Solid appearance and quality • Dual phone/telco capability

The Flexiva RMXdigital™ system features a compact design that offers high reliability, excellent performance, operational flexibility, easy-to-use controls, and robust construction. In addition to rotary source selectors and take buttons, all input modules are equipped with 10-character alphanumeric displays and status LEDs to show the active or next input. Being the first choice of major-market stations and programmers, the Flexiva RMXdigital console includes a number of industry firsts, including universal modules for unprecedented broadcast versatility, switchable analog or digital inputs, four program buses, six mix-minuses and frame sizes with up to 28-input module capacity. The Flexiva RMXdigital console includes onboard setup/storage for snapshot sessions, with automated recall and extensive logic functionality. Hot-swappable panel modules and instant access to all connections via the tilt-up rear panel contribute to quick and simple installation and maintenance. Radio stations with sophisticated programming requirements can step into the future without turning their backs on the full-featured operation they’ve come to expect from past analog designs. The Flexiva RMXdigital system is an excellent choice for standalone and networked console applications. Leverage the Flexiva VistaMax™ network to share audio resources across a facility without the need for time consuming and costly wiring. The Flexiva RMXdigital console can be networked with the Flexiva VistaMax network audio management systems, as well as with Flexiva NetWave® consoles, throughout the facility. And the the system’s analog inputs can be increased with a 4X-A2D A to D converter. Take a closer look at the Flexiva RMXdigital — a console with features and functionality that will exceed your expectations.

Flexiva StereoMixer™digital is a cost-effective, compact audio console, combining a small form factor with the digital performance you expect. Flexiva StereoMixerdigital is perfect for applications such as small air studios, voice tracking studios, production rooms, nonlinear editing suites and newsrooms. The smaller size, however, does not mean less quality. Flexiva StereoMixerdigital has the same quality switches and components that you get in our larger-format consoles. The rackmount version gives you the same power in a standalone footprint. It is ideal for news workstations or any place you need high-quality digital mixing in a compact form factor. The rackmount version is also equally at home in a TV facility, nonlinear editing suite or in “live” trucks, otherwise known as OB/remote vans. Extend Flexiva StereoMixerdigital analog inputs with a 4X-A2D A to D converter.

Integrator™ Equipment Racks Broadcast Equipment Rack Cabinets A to D Converter Quad Analog to Digital Converter Headphone Distribution System Headphone Distribution for Radio Systems Talent Control Systems Host Dashboard, Control Panels and Clock/Timer World Feed Panel Audio Signal Connection System