Fiber
-
9211-FRx 3G/HD/SD-SDI Fiber Receiver
The 9211-FRx is a 3G/HD/SD-SDI fiber receiver card, and converts a fiber optic signal to an SDI signal. The 9211-FRx detects the incoming fiber signal and outputs the SDI signal over six BNC connectors. Card-edge LED indicators identify the presence of incoming video and the identified signal data rate.
-
9213-FRxRx Dual 3G/HD/SD-SDI Fiber Receiver
The 9213-FRxRx is a dual 3G/HD/SD-SDI fiber receiver (OE) card. The card converts two fiber optic signals to independent SDI output signals. The 9213-FRxRx detects the incoming fiber signal and outputs the up to six SDI signals over six BNC connectors. Card-edge LED indicators identify the presence of incoming video and the identified signal data rate.
-
9216-FRx-DM AES/EBU Fiber Audio De-Embedder
The 9216-FRx-DM accepts HD/SD-SDI or fiber inputs and provides up to eight de-embedded AES pairs on BNC connectors. The 9216-FRx-DM offers full 24-bit audio processing/routing control (card edge and remote control) for individual channel gain, delay (up to one second), phase invert, as well as channel summing. AES outputs can be set to mute when routed channels fall below a selectable threshold. User presets allow fast and easy recall of custom settings.
-
9400-OE-Series CWDM Receivers SDI/ASI/MADI Fiber-to-Coax Multi-Channel Receivers
convenient solution for multiplexing and de-multiplexing discrete coaxial channels onto a common fiber pipeline. The 9400-OE-CWDM series Fiber-to-Coax CWDM receivers allow up to four separate SDI, ASI, or MADI streams to be de-multiplexed from a fiber-optic trunk where embedded using CWDM. Available in numerous wavelength divisions and fiber connector types, the 9400-OE-CWDM series provide a card-based solution for high-density distribution and de-multiplexing between a fiber trunk and discrete coax signals. With up to four coaxial channels accommodated per card and 18 available discrete fiber wavelengths, the 9400-CWDM series can accommodate up to 18 discrete coax channels over a single fiber trunk. Utilizing the openGear® open-architecture platform, the 9400-OE-CWDM series offers scalable incorporation and the easy-to-use DashBoard™ setup and control operator interface.
-
9411 1 In / 4 Out Fiber-to-BNC Receiver / Crosspoint Card
The 9400-series SDI/Fiber transport cards provide a card-based solution for high-density distribution and multiplexing between discrete SDI signals and fiber buses. Utilizing the openGear® open-architecture platform, the 9400-series offers scalable incorporation and the easy-to use DashBoard™ setup and control operator interface.
-
9412 2 In / 4 Out Fiber-to-BNC Receiver / Crosspoint Card
The 9400-series SDI/Fiber transport cards provide a card-based solution for high-density distribution and multiplexing between discrete SDI signals and fiber buses. Utilizing the openGear® open-architecture platform, the 9400-series offers scalable incorporation and the easy-to use DashBoard™ setup and control operator interface.
-
9413 3 In / 4 Out Fiber-to-BNC Receiver / Crosspoint Card
The 9400-series SDI/Fiber transport cards provide a card-based solution for high-density distribution and multiplexing between discrete SDI signals and fiber buses. Utilizing the openGear® open-architecture platform, the 9400-series offers scalable incorporation and the easy-to use DashBoard™ setup and control operator interface.
-
9414 4 In / 4 Out Fiber-to-BNC Receiver / Crosspoint Card
The 9400-series SDI/Fiber transport cards provide a card-based solution for high-density distribution and multiplexing between discrete SDI signals and fiber buses. Utilizing the openGear® open-architecture platform, the 9400-series offers scalable incorporation and the easy-to use DashBoard™ setup and control operator interface.
-
9212-FTx 3G/HD/SD-SDI Fiber Transmitter
The 9212-FTx is a 3G/HD/SD-SDI fiber transmitter (EO) card. The card converts an SDI signal to a fiber optic link, allowing for longer transport distances. The 9212-FTx also equalizes the incoming SDI signal, and then reclocks the signal with automatic rate detection for all popular data rates. Card-edge LED indicators identify the presence of incoming video and the identified signal data rate. With full 3G/HD/SDI support of both fiber and coax, the 9212-FTx is the ideal universal SDI distribution amplifier.
-
9214-FTxTx Dual 3G/HD/SD-SDI Fiber Transmitter
The 9214-FTxTx is dual SDI to fiber optic transmitter card. The card converts two SDI signals to two fiber optic links, allowing for longer transport distances. Reclocked SDI outputs provide copies of each SDI input signal. The card supports serial digital data rates from 270 Mbps up to 2.98 Gbps (1080p). LED indicators at the front of the card identify the presence of incoming video and the identified signal data rates for each channel independently.
-
9215-FTx-EM AES/EBU Fiber Audio Embedder
The 9215-FTx-EM accepts an HD/SD-SDI BNC input along with up to eight AES BNC audio pairs, providing embedding and audio processing. The card provides SDI outputs on HD-SD-SDI BNC and fiber outputs.
-
9400 Series SDI/Fiber Multi-Channel Transports with I/O Crosspoints
The 9400-series SDI/Fiber transport cards provide a card-based solution for high-density distribution and multiplexing between discrete SDI signals and fiber buses. Utilizing the openGear® open-architecture platform, the 9400-series offers scalable incorporation and the easy-to use DashBoard™ setup and control operator interface.
-
9400-EO-Series CWDM Transmitters SDI/ASI/MADI Coax-To-Fiber Multi-Channel Transmitters (Electrical-
Coarse Wave Division Multiplexing (CWDM) offers a cost-effective, scalable, and convenient solution for multiplexing and de-multiplexing discrete coaxial channels onto a common fiber pipeline. The 9400-EO-CWDM series Coax-To-Fiber CWDM transmitters allow up to four separate SDI, ASI, or MADI streams to be multiplexed onto a fiber-optic trunk using CWDM. Available in numerous wavelength divisions and fiber connector types, the 9400-EO-CWDM series provide a card-based solution for high-density distribution and multiplexing between discrete coax signals and a fiber trunk. With up to four coaxial channels accommodated per card and 18 available discrete fiber wavelengths, the 9400-CWDM series can accommodate up to 18 discrete coax channels over a single fiber trunk. Utilizing the openGear® open-architecture platform, the 9400-EO-CWDM series offers scalable incorporation and the easy-to-use DashBoard™ setup and control operator interface.
-
9401 4 In / 1 Out BNC-to-Fiber Transmitter / Crosspoint Card
The 9400-series SDI/Fiber transport cards provide a card-based solution for high-density distribution and multiplexing between discrete SDI signals and fiber buses. Utilizing the openGear® open-architecture platform, the 9400-series offers scalable incorporation and the easy-to use DashBoard™ setup and control operator interface.
-
9402 4 In / 2 Out BNC-to-Fiber Transmitter / Crosspoint Card
The 9400-series SDI/Fiber transport cards provide a card-based solution for high-density distribution and multiplexing between discrete SDI signals and fiber buses. Utilizing the openGear® open-architecture platform, the 9400-series offers scalable incorporation and the easy-to use DashBoard™ setup and control operator interface.
-
9403 4 In / 3 Out BNC-to-Fiber Transmitter / Crosspoint Card
The 9400-series SDI/Fiber transport cards provide a card-based solution for high-density distribution and multiplexing between discrete SDI signals and fiber buses. Utilizing the openGear® open-architecture platform, the 9400-series offers scalable incorporation and the easy-to use DashBoard™ setup and control operator interface.
-
9404 4 In / 4 Out BNC-to-Fiber Transmitter / Crosspoint Card
The 9400-series SDI/Fiber transport cards provide a card-based solution for high-density distribution and multiplexing between discrete SDI signals and fiber buses. Utilizing the openGear® open-architecture platform, the 9400-series offers scalable incorporation and the easy-to use DashBoard™ setup and control operator interface.
TX25 Plus & TX250 Plus FM Transmitters
THE TX 25 PLUS AND TX 250 PLUS FM EXCITERS ARE DESIGNED TO ACCEPT STEREO MONO MPX AUDIO SIGNALS TO BE MODULATED IN FM AND TO AMPLIFY THE RF. THE TX 25 PLUS AND TX 250 PLUS FM ARE EQUIPPED WITH AN INNOVATIVE AND HIGH-PERFORMANCE POWER SUPPLY STAGE «SWITCHING-MODE MAINS DIRECT», WITHOUT MAINS TRANSFORMER (THE MAINS VOLTAGE CAN VARY FROM 80 TO 265 VAC WITH NO VARIATION ON THE OUTPUT POWER). MAJOR FEATURES INCLUDE HIGH INSULATION FROM MAINS, HIGH OVERALL EFFICIENCY, MODULAR DESIGN FOR FRIENDLY MAINTENANCE, COMPLIANCE WITH EUROPEAN NOrms EN61000-4-3 AND LONG TERM RELIABILITY. IN THESE FM EXCITERS, AN AGC AUDIO CIRCUIT CONTROL IS INCLUDED TO KEEP THE MODULATION LEVEL BELOW THE MAXIMUM FIGURES ALLOWED IN COMPLIANCE WITH CEPT/ERC 5401 E. THE RF OUTPUT SPECIFICATIONS HAVE BEEN DRASTICALLY IMPROVED, THUS OBTAINING FIGURES WHICH ARE COMPARABLE TO DIGITAL TRANSMITTERS. THESE FM EXCITERS CAN BE CONTROLLED LOCALLY BY A PC OR REMOTELY BY MODEM. THE TX 25 PLUS IS A COMPLETELY SOLID STATE EXCITER, FREQUENCY AGILE CONTROLLABLE FROM THE FRONT PANEL WITH ADJUSTABLE OUTPUT POWER UP TO 25 W. THE POWER DEVICE USED TO OBTAIN 25 W IS THE PHILIPS BLF 245. IN TX 250 PLUS FM EXCITER, WHICH CAN BE USED AS A STAND-ALONE TRANSMITTER AS WELL, A POWER AMPLIFIER MODULE WITH THE POWER DEVICE PHILIPS 278, ABLE TO GRANT 250 W OUTPUT POWER IN THE ENTIRE FREQUENCY RANGE HAS BE ADDED.
Anten FM là sản phẩm do Công ty cổ phần phát triển phát thanh truyền hình BDC nghiên cứu, thiết kế và sản xuất. Các đặc trưng sản phẩm, đặc tính kỹ thuật đã được nghiên cứu, thử nghiệm và ứng dụng các tiến bộ khoa học kỹ thuật tiên tiến nhất, tối ưu hóa phục vụ tốt nhất mục đích sử dụng.Sản phẩm của công ty BDC đã được cấp dấu chất lượng nghành và đạt được uy tín cao về chất lượng, độ bền trong lĩnh vực Phát thanh. Với những kỹ thuật tiên tiến sản phẩm đạt được tính năng kỹ thuật cao nhất.
Cụm thu loa không dây FM FSW11
Bộ thu FM không dây là sản phẩm do công ty BDC nghiên cứu, thiết kế và sản xuất, ứng dụng các công nghệ kỹ thuật hiện đại tạo nên một sản phẩm tiêu chuẩn công nghiệp. Thiết bị được trang bị bộ thu sóng (tuner) chất lượng cao, sử dụng mạch vòng khóa pha tạo tần số thu ổn định, độ nhạy cao. Khuyếch đại công suất sử dụng các IC khuyếch đại đời mới cho hiệu suất cao, chất lượng âm thanh hoàn hảo. Ứng dụng công nghệ điều khiển bằng vi xử lý, các chế độ hoạt động của thiết bị luôn được đảm bảo tối ưu. Các chỉ tiêu kỹ thuật hoạt động được hiển thị đầy đủ, rõ ràng trên màn hình LCD, giao diện người dùng thân thiện. Công nghệ điều khiển từ xa kỹ thuật số bằng RDS cho phép dễ dàng quản lý liên tục hoạt động của hệ thống từ phòng máy mà không làm ảnh hưởng tới chất lượng âm thanh. Sản phẩm khi được xuất xưởng đều được kiểm định đạt tiêu chuẩn Việt nam.