The 9011 provides 10-bit SD-SDI (SMPTE 259M-C)-to-analog video conversion with a variety of simultaneously available output formats: analog composite, Y/C, YPbPr, and RGB. When used with an “-A/S” (split) rear module, the space-saving design of the 9011 provides for high density, allowing two cards to be collocated in the same frame space normally occupied by a single card.

The 9015 is a dual SDI video-to-analog composite and reclocked SDI converter. Analog or digital output configuration can be selected 
as needed for a particular application. The 9015 has two digital-to-analog encoders (A and B SDI to analog encoders). Each encoder has four outputs that can be user-configured as analog or reclocked SDI on an output-by-output basis. Composite output gain control and user configurations are adjustable using the card-edge controls.

The 9016 is a triple SDI-to-analog composite encoder with reclocked SDI. Analog or digital output configuration can be selected as needed 
for a given application. The 9016 has three separate SDI encoders, providing three outputs on converter A, two outputs on converter B, and two outputs on converter C. Each output can be selected to be either analog or digital. Analog output gain control for composite is adjustable using 
card-edge controls.

The 9018 is a quad 4:2:2 SDI-to-analog composite converter. Card-edge gain, status LED, and configuration switches allow adjustments without having to remove the card from the frame. Configuration switches allow access to setup on/off (NTSC only), VBI blanking on/off and test color bars on/off. Other features include true sync output levels of -300 mV, low power consumption, and remote monitoring (including power and temperature) using DashBoard™ software.

Excellent for applications that need video distribution and signal monitoring, the 5130 module is both a serial digital DA and a digital-to-analog converter. The module has one serial digital input with four reclocked serial digital outputs and four composite monitor outputs.

The 5230 converts serial digital component video into either composite or component analog outputs. Its 8 x oversampling and 12 bit processing ensure high quality conversion for use in the most demanding applications.

BrightEye 11 provides digital to analog video conversion with the full range of analog output formats available: Beta, SMPTE, RGB, and composite (with simultaneous Y/C). 12 bit processing and conversion at 8 x oversampling mean the best looking images possible.

BrightEye 15 is a digital to analog video converter with a timeable output. It’s perfect for feeding analog switchers and routers, where signal timing is required.

BrightEye 16 is a digital to analog video converter with a timeable output. It’s perfect for feeding analog switchers and routers, where signal timing is required. It’s also a disembedder and provides four analog audio outputs.