As part of PESA’s world-class routing switcher line, the Cheetah 64NE, a 64x64 3G-SDI routing switcher, provides a huge advantage over similar offerings on the market today. Starting with its small footprint, the 4RU frame can pack an enormous amount of features normally found in larger frame sizes. For instance, each frame supports internal redundant power and control, so no need to plan for extra rack space. The power efficient frame requires no more than 300 watts when fully loaded. The power supply, control card and matrix card are hot swappable and easily accessible from the front. Control and networking features are offered in a wide range of solutions, including Ethernet control, RS-232 and web-based control.

In command and control environments, it is not uncommon to require more outputs to support presentation displays, projectors and video walls. In routing switcher environments, this is where a rectangular matrix packages can provide exceptional value over traditional square matrix designs. PESA’s 64XE was designed with this in mind. In just 6RU, this frame can be configured to support up to 64x128. With one matrix card installed, each frame can support up to 64x64. By adding a second matrix card, the system can grow to a full 64x128. The 64XE frame is perfect for applications where signals need to be linked to multi-viewer or multiple destinations simultaneously. Starting with its small footprint, the 6RU frame can pack an enormous amount of features normally found in larger frame sizes. For instance, each frame supports internal redundant power and control, so no need to plan for extra rack space. The power efficient frame requires no more than 600 watts when fully loaded. The power supply, control card and matrix card are hot swappable and easily accessible from the front. Control and networking features are offered in a wide range of solutions, including Ethernet control, RS-232 and web-based control. Customized output configurations can be set up easily using PESA's 3500PRO or PERC2000 Control Software Additionally, the 64XE supports both fiber and coax IO offering extreme flexibility in cable management. Fiber sources can be connected directly to each frame, thus eliminating the need for fiber-to-copper conversion gear. All cards are hot-swappable with the matrix card, power supplies, and matrix control systems easily removed from the front of the chassis. Input and output cards are available for fiber, coax, and CWDM applications and can be mixed in groups of 16 input or output channels. Signal formats supported include DVB/ASI, SD-SDI, HD-SDI, 3G-SDI, and serial data streams from 270Mbps up to 3Gbps. Additionally, signal formats for DVI, VGA, RGsB, RGBHV and YPbPr are handled with our external Vidblox transmitter and receiver modules. Other features include muxing and de-muxing cards supporting 16 HD-SDI channels over a single CWDM fiber cable and full integration of embedding and de-embedding of audio signals with 16 channel plug-in I/O card sets. With PESA’s easyPORT SFP modules fiber-cage input cards can be adapted for NTSC/PAL to SD-SDI and fiber-cage output cards can be adapted for SD-SDI to NTSC/PAL. All inputs feature auto-equalization and auto-rate sensing. The digital output cards support reclocking on all outputs and can be set for bypass if reclocking is not required. DVB-ASI is fully supported on every path. Sync reference inputs accept analog black burst in NTSC or PAL formats as well as high definition Tri-level sync. Designed for less space, less cost and lower total cost of ownership - PESA’s Cheetah line of routing switchers combines the latest in robust technology with the flexibility required to future proof your investment in large-scale, multi-format, and expandable routing needs. PESA continues to lead in signal routing with Cheetah’s ability to offer the widest range of frames and card configurations. Designed to support high-quality routing 24/7, Cheetah routing switchers are well suited for government, military, broadcast, mobile, telco, and corporate applications where large numbers of signals need to be switched. High density design with efficiency in mind - All Cheetah frames are designed to operate in the toughest environments and are well suited for mobile truck applications or military tactical operation centers (TOC). Each frame features hot-swappable modules for easy service and all modules employ the latest in digital technology for low power consumption. All Cheetah routers incorporate redundant, load-sharing power supplies and feature a superior air flow design for even cooling across all critical components - insuring longer life and preventing board-level failures. High Reliability for mission critical applications – Input and Output modules support sixteen ports per card, thus limiting the number of signals that can be affected by a single module. Since 2001, Cheetah systems have been designed around architecture to support mission critical applications. Support for redundant power and redundant control are key elements of the frame package allowing users to easily swap over to backup systems without taking down the entire system. System Flexibility to support all digital formats from 143Mbps to 3Gbps – By offering a flexible crosspoint architecture, Cheetah can support signals from 143Mb/s up to 3Gb/s and can support any broadcast standard including SDI, HD-SDI, DVB-ASI, and 3G-SDI in either optical or copper formats. In addition, Cheetah supports fiber CWDM inputs and outputs with up to 16 HD-SDI channels over a single fiber cable. With optional MUX and DEMUX modules, the Cheetah video router can operate seamlessly with PESA’s DRS distributed audio system allowing up to 128 audio channels per card to be embedded or de-embedded within the Cheetah video frame. Frame Expansion to scale on your schedule and budget – By using a modular approach to inputs and outputs, each Cheetah frame can be configured in non-square and square configurations as low as 16X16. This modular approach provides excellent in-service expansion without requiring complex and expensive frame swap-outs. Comprehensive Control – All of PESA’s routing systems are controlled by the most flexible and comprehensive router control system available. Cheetah frames provide internal slots for up-to two system controller cards providing complete connectivity control to every input and output. Users can easily control the router system from any number of remote control panels or through the Cattrax network control software. Cheetah frames can be configured by many 3rd party control devices such as Crestron, AMX, or other types of automation system via serial or network connectivity. Internal Monitoring and Diagnostics – The Cheetah frame provides unmatched performance for signal management and diagnostics. Smart navigational tools allow quick preview of system performance, power supply voltages, interior temperature, and fan speed. I/O cards sets available: BNC SD-SDI, HD-SDI, 3G-SDI Input Card 16 Channels of SD/HD/3G-SDI or Mult-rate signals from 143Mbs to 3Gbs. Equalization to 100m for SMPTE 292M or 80m for SMPTE 424M. Supports SDI and ASI signal data rates. BNC SD-SDI, HD-SDI, 3G-SDI Output Card 16 Channels of SD/HD/3G-SDI or Multi-rate signals from 143Mbs to 3.0Gbs. Supports SMPTE 424M, SMPTE 292M and SMPTE 259M reclocking standards of 143, 177, 270, 1.485Gbs, and 2.97Gbs. In addition non-standard signals from 143Mbs to 3.0Gbs are supported. With Cattrax software, each channel can be selected to turn on/off reclocking. Fiber SD-SDI, HD-SDI, 3G-SDI Input Card 16 Channels of SD/HD/3G-SDI or Mulit-rate signals supporting SMPTE 424M, SMPTE 292M or SMPTE 259M data rates. Allows for either singlemode or multimode cabling. Modules are SFP (small form factor pluggable) supporting 1310nm wave lengths. Optional wave lengths are supported on special order. Connector type is small form factor LC. Fiber SD-SDI, HD-SDI, 3G-SDI Output Card 16 Channels of SD/HD/3G-SDI or Multi-rate signals supporting SMPTE 424M,SMPTE 292M or SMPTE 259M data rates. Allows for either singlemode or multimode cabling. Cards can be set to support reclocking or non-reclocking modes. Modules are SFP (small form factor pluggable) supporting 1310nm wave lengths. Optional wave lengths are supported on special order. Connector type is small form factor LC. CWDM: 16 Channel DE-MUX plug-in card 16 Channels of CWDM on-board fiber signals are de-muxed from a single output fiber cable that can be received from 5Km away. Modules use wavelengths from 1410nm to 1610nm. This input card supports SD/HD-SDI and Multi-rate signals from 19Mbps to 1.5Gbps. Connector type is small form factor LC. CWDM: 16 channel MUX plug-in card 16 Channels of Coarse Wave-division Multiplexed on-board fiber signals are muxed to a single output fiber cable. SFP (small form factor pluggable) modules use wavelengths from 1410nm to 1610nm. This output card supports SD/HD-SDI and Mulit-rate signals from 19Mbs to 1.5Gbs. Connector type is small form factor LC. Audio de-embedding plug-in card 16 Channels of SD/HD/3G-SDI video input with de-embedding option for all sixteen channels. Interconnects with the Cheetah DRS audio system for seamless de-embedding of AES/Analog/MADI audio signals. Auto equalization on all inputs and full support of all DRS audio remedies such as gain, delay, and swap. Audio embedding plug-in card 16 Channels of SD/HD/3G-SDI outputs with embedding options for AES/Analog/MADI audio. Interconnects with Cheetah DRS Audio system and provides seamless integration and audio remedy controls such as gain, delay, and swap. Up to 128 Channels of audio per card. Each video output supports reclocking for SMPTE 259M, 292M, and 424M up to 3.0Gbps or can be easily set to by-pass mode for non-standard formats. NTSC/PAL to SDI Conversion Modules and plug-in card – up to 16 channels per card With easySFP modules for NTSC/PAL to SD-SDI conversion, up to 16 channels of analog video can be converted to SD-SDI at 270Mbps. Incoming sources from NTSC/PAL can be transmitted as SDI sources for SMPTE 259. SDI to NTSC/PAL Conversion Modules and plug-in card – up to 16 channels per card With easySFP modules for SD-SDI to NTSC/PAL, up to 16 channels of SDI signals can be converted to NTSC/PAL for legacy playout to monitors or tape machines.

DESCRIPTION: Cheetah 128NE (128x128) For mid-range multi-format routing switcher systems, PESA’s Cheetah 128NE offers support for 3G-SDI, HD-SDI, SD-SDI, ASI, embedded audio and CWDM signals. Inside the 7 RU frame a single 128x128 crosspoint matrix supports I/O expansion in groups of 16. Each frame includes slots for redundant control, redundant power and easy access to hot-swap components for mission critical system architecture requirements. The 128NE frame I/O card options allow incredible flexibility by allowing systems to be designed around the widest range of connector and signal types. Input and Output cards are available for coax and fiber with options to include CWDM fiber supporting up to 16 HD-SDI channels over one fiber optic cable or embedding/de-embedding up to 16 channels per video port. The 128NE supports many 3rd party control protocols as well as the full featured PESA control system offered with the 3500PRO and PERC2000 System Control Software.

DESCRIPTION: Cheetah 128XE (128x256) The Cheetah 128XE Digital Video Router is the latest development in high definition video technology for formats up to 1080p/60 and 3D Stereoscopic transports. Based on field proven Cheetah Advance Technology Systems (CATS™) technology, the 128XE adds the latest in high definition technology with exceptional package density. To support the needs of additional outputs, this frame can be configured with twice as many outputs, making it an attractive solution for large monitor walls applications. Each 11RU frame can be populated with four 128x128 matrix cards allowing I/O sizes up to 128x256. The matrix card and I/O cards allow many different square and rectangular frames sizes making it a cost effective solution when future expansion is planned. Input and Output cards are based on 16 ports per blade. Additionally, the 128XE supports both fiber and coax I/O offering extreme flexibility in cable management. Fiber sources can be connected directly to each frame, thus eliminating the need for fiber-to-copper conversion gear. All pluggable cards are hot-swappable with the matrix card, power supplies, and matrix control systems easily removed from the front. The 128XE supports many 3rd party control protocols as well as the full featured PESA control system offered with the 3500PRO and PERC2000 System Control Software.

DESCRIPTION: Cheetah 144NE (144x144) PESA’s Cheetah 144NE Fiber Router System is a high performance, modular fiber optic switch system for either ProAV or Broadcast HD-SDI and 3G-SDI applications. Cheetah 144NE Fiber is expandable in sizes from 36X36 up to 144X144 in the same 4RU frame. It is fully compatible with the new Vidblox Series of fiber media extenders for DVI, HD-SDI, and 3G-SDI. The frame supports redundant power, control, and a hot-swappable 144X144 Crosspoint matrix. I/O cards allow easy expansion in groups of 36 inputs or 36 outputs per card which simplifies future expansion without the need to replace cards or frames. The frame system is based on the field proven Cheetah line of routers and maintains the same high reliability always found in the PESA brand. The system’s integrated Matrix Frame Controller monitors the health of the unit and automatically recognizes any new I/O cards.

DESCRIPTION: Cheetah 288XR (288x288) The 288XR High Definition Digital Video Routing Switcher handles a full range of digital video signals. From broadcast standards for SMPTE S259, S292, S424 and ITU-R Rec. 601 to traditional NTSC/PAL conversion using our exclusive easySFP modules; the Cheetah 288XR provides brilliant advantages for multi-format routing needs. Signal formats up to 1080p60 can be supported. The frame can support the widest range of rectangular and square matrix sizes. Each 18RU frame can be populated with four 144x144 matrix cards allowing I/O sizes up to 288x288. The matrix card and I/O cards allow many different square and rectangular frames sizes making it a cost effective solution when future expansion is planned. Input and Output cards are based on 16 ports per blade. Optional features include redundant power and control. Frames can be configured using I/O cards supporting fiber, coax, both fiber and coax, or embedder/de-embedder cards to operate seamlessly with our distributed audio switch fabric. Analog conversion for NTSC/PAL can be accomplished using the easySFP module option. The 288XR supports many 3rd party control protocols as well as the full featured PESA control system offered with the 3500PRO and PERC2000 System Control Software.

DESCRIPTION: Cheetah 288XE (288x576) The Cheetah 288XE Digital Video Router is the latest development in high definition video technology for formats up to 1080p/60 and 3D Stereoscopic transports. Based on field proven Cheetah Advance Technology Systems (CATS™) technology, the 288XE adds the latest in high definition technology with exceptional package density. To support the needs of additional outputs, this frame can be configured with twice as many outputs, making it an attractive solution for large monitor walls applications. Each 18RU frame can be populated with eight 144x144 matrix cards allowing I/O sizes up to 288x576. The matrix card and I/O cards allow many different square and rectangular frames sizes making it a cost effective solution when future expansion is planned. Input and Output cards are based on 16 ports per blade. Additionally, the 288XE supports both fiber and coax I/O offering extreme flexibility in cable management. Fiber sources can be connected directly to each frame, thus eliminating the need for fiber-to-copper conversion gear. All pluggable cards are hot-swappable with the matrix card, power supplies, and matrix control systems easily removed from the front. The 288XE supports many 3rd party control protocols as well as the full featured PESA control system offered with the 3500PRO and PERC2000 System Control Software.

DESCRIPTION: Cheetah 576XR (576x576) The 576XR High Definition Digital Video Routing Switcher handles a full range of digital video signals. From broadcast standards for SMPTE S259, S292, S424 and ITU-R Rec. 601 to traditional NTSC/PAL conversion using our exclusive easySFP modules; the Cheetah 576XR provides brilliant advantages for multi-format routing needs. Signal formats up to 1080p60 are supported. The 576XR provides for the widest range of rectangular and square matrix sizes. Each 27RU frame can be populated with sixteen 144x144 matrix cards allowing I/O sizes up to 576x576. Input and Output cards are based on 16 ports per blade. The matrix card and I/O card granularity allows many different square and rectangular frames sizes making it a cost effective solution when future expansion is planned. Optional features include redundant power and control. Frames can be configured using I/O cards supporting fiber, coax, both fiber and coax, or embedder/de-embedder cards to operate seamlessly with our distributed audio switch fabric. Analog conversion for NTSC/PAL can be accomplished using the easySFP module option. The 576XR supports many 3rd party control protocols as well as the full featured PESA control system offered with the 3500PRO and PERC2000 System Control Software.

DESCRIPTION: Cheetah 1024XR (1024x512) The 1024XR High Definition Digital Video Routing Switcher handles a full range of digital video signals. From broadcast standards for SMPTE S259, S292, S424 and ITU-R Rec. 601 to traditional NTSC/PAL conversion using our exclusive easySFP modules; the Cheetah 1024XR provides brilliant advantages for multi-format routing needs. Signal formats up to 1080p60 are supported. The 1024XR provides for the widest range of rectangular and square matrix sizes. Each 41RU frame is populated with 128x128 matrix cards allowing I/O sizes up to 1024x512. Input and Output cards are based on 16 ports per blade. The matrix card and I/O card granularity allows many different square and rectangular frames sizes making it a cost effective solution when future expansion is planned. Optional features include redundant power and control. Frames can be configured using I/O cards supporting fiber, coax, both fiber and coax, or embedder/de-embedder cards to operate seamlessly with our distributed audio switch fabric. Analog conversion for NTSC/PAL can be accomplished using the easySFP module option. The 1024XR supports many 3rd party control protocols as well as the full featured PESA control system offered with the 3500PRO and PERC2000 System Control Software.