BrightEye 40 is a reclocking serial digital video distribution amplifier with four outputs. The SDI input will automatically equalize up to 300 meters (1000 feet) of digital cable. Following equalization, the 270 Mb/s SDI input signal is reclocked before being delivered to four simultaneous SDI outputs.

BrightEye 42 is a reclocking distribution amplifier that can be used with high definition, standard definition or ASI signals. When used with SD or ASI input signals, the serial input automatically equalizes up to 300 meters of digital cable. When used with an HD input signal, the serial input automatically equalizes up to 100 meters of digital cable. The equalized signal is reclocked and delivered to four simultaneous outputs. The reclocker is ASI compliant and all four outputs have the correct ASI polarity.

BrightEye 43 is a reclocking distribution amplifier that can be used with standard definition video signals, 3 Gb/s and 1.5 Gb/s high definition signals, or ASI signals. The signal is equalized, reclocked and delivered to the outputs.

The 5160 Serial Digital Protection DA module is a fail-safe bypass protection switch for monitoring and switching critical digital paths. When a fault is detected in the Primary input, the switch will activate, causing the Secondary (backup) input to be switched to the module’s distributed outputs. The switch can operate in two modes; automatic or nonresetting.

The 9262 features digital-to-analog audio conversion with AES/EBU signal distribution. It supports audio sampling frequencies 
from 30 kHz to 192 kHz, and converts the incoming AES digital audio signal to a stereo balanced analog audio signal pair using 
24-bit conversion. Cable equalization and reclocking techniques enable the 9262 to reliably recover the incoming digital audio signal.

The 9341 is an analog audio to AES converter, supporting up to eight balanced analog inputs into eight AES output channels.  The 24-bit audio conversion supports audio input levels up to +24 dBu.  The AES output pairs can be locally timed, or timed to a frame reference or a DARS input.

The 9345 is an analog-to-AES digital audio converter, providing A/D audio conversion and AES signal distribution. The card supports audio sampling frequencies from 30 kHz to 192 kHz, and converts the incoming stereo analog audio signal to an AES digital audio signal using 24-bit conversion.

The 6010 module converts four channels of analog audio to two AES digital audio streams. Analog to digital conversion is performed with 24 bit precision for outstanding sonic performance. Use the 6010 to convert the audio outputs of your existing analog VTRs or any other high quality analog audio source. Like all modules in the Avenue series, the 6010 may be controlled either locally or remotely. Alternately, consider using the 5330/6330 and 8500 series.

The 6020 module converts two AES digital audio streams to four channels of analog audio. Digital to analog conversion is performed with 24 bit precision for outstanding sonic performance. Use the 6020 to input digital audio signals to your existing analog VTRs or for any other application where digital audio signals must be fed to equipment with analog inputs. Like all modules in the Avenue series, the 6020 may be controlled either locally or remotely. Alternately, consider using the 5230/6230 and 8500 series.

The 6030 module provides silent AES and word clock outputs that are locked to a reference video input such as house color black. The 6030 is indispensable in video installations with digital audio equipment. Use it to generate digital audio “black” and to lock A/D converters, sample rate converters, audio workstations, or any other digital audio equipment that accepts an AES or word clock signal as a reference. Like all modules in the Avenue series, the 6030 may be controlled either locally or remotely. Alternately, consider using the 5400/5410 series.

The 6040 Tracking Audio Delay module provides both fixed and variable delay to ensure proper synchronization between picture and sound. Ideal for incoming satellite feeds and studio signals, the 6040 provides an elegant solution for lip sync issues. Its 24 bit digital signal processing ensures perfect fidelity.

BrightEye 20 is a versatile audio Mux/Demux. With SDI video I/O, and both analog and AES I/O, it is field configurable for embedding or disembedding.

BrightEye 30 is a flexible audio converter that can be a two channel, bi-directional ADC and DAC, or it can be configured as a four channel converter. Perfect in desktop, post and broadcast applications, 24 bit processing ensures beautiful audio.

BrightEye 30-D is a flexible audio converter that can be a two channel, bi-directional ADC and DAC, or it can be configured as a four channel converter. Perfect in desktop, post and broadcast applications, 24 bit processing ensures beautiful audio.

The 9011 provides 10-bit SD-SDI (SMPTE 259M-C)-to-analog video conversion with a variety of simultaneously available output formats: analog composite, Y/C, YPbPr, and RGB. When used with an “-A/S” (split) rear module, the space-saving design of the 9011 provides for high density, allowing two cards to be collocated in the same frame space normally occupied by a single card.

The 9015 is a dual SDI video-to-analog composite and reclocked SDI converter. Analog or digital output configuration can be selected 
as needed for a particular application. The 9015 has two digital-to-analog encoders (A and B SDI to analog encoders). Each encoder has four outputs that can be user-configured as analog or reclocked SDI on an output-by-output basis. Composite output gain control and user configurations are adjustable using the card-edge controls.

The 9016 is a triple SDI-to-analog composite encoder with reclocked SDI. Analog or digital output configuration can be selected as needed 
for a given application. The 9016 has three separate SDI encoders, providing three outputs on converter A, two outputs on converter B, and two outputs on converter C. Each output can be selected to be either analog or digital. Analog output gain control for composite is adjustable using 
card-edge controls.

The 9018 is a quad 4:2:2 SDI-to-analog composite converter. Card-edge gain, status LED, and configuration switches allow adjustments without having to remove the card from the frame. Configuration switches allow access to setup on/off (NTSC only), VBI blanking on/off and test color bars on/off. Other features include true sync output levels of -300 mV, low power consumption, and remote monitoring (including power and temperature) using DashBoard™ software.

Excellent for applications that need video distribution and signal monitoring, the 5130 module is both a serial digital DA and a digital-to-analog converter. The module has one serial digital input with four reclocked serial digital outputs and four composite monitor outputs.

The 5230 converts serial digital component video into either composite or component analog outputs. Its 8 x oversampling and 12 bit processing ensure high quality conversion for use in the most demanding applications.

BrightEye 11 provides digital to analog video conversion with the full range of analog output formats available: Beta, SMPTE, RGB, and composite (with simultaneous Y/C). 12 bit processing and conversion at 8 x oversampling mean the best looking images possible.

BrightEye 15 is a digital to analog video converter with a timeable output. It’s perfect for feeding analog switchers and routers, where signal timing is required.

BrightEye 16 is a digital to analog video converter with a timeable output. It’s perfect for feeding analog switchers and routers, where signal timing is required. It’s also a disembedder and provides four analog audio outputs.

The 9021 provides 10-bit analog-to-SDI conversion for NTSC and PAL SD conversions. When used with an “-A/S” (split) rear module, the space-saving design of the 9021 provides for high density, allowing two cards to be collocated in the same frame space normally occupied by a single card. The 9021 accepts composite, Y/C and component YPbPr analog input signals and provides an SMPTE 259M-C 270 Mbps SDI output. Differential inputs are included for common mode noise rejection. A 4-, 3-, or 2-line comb or notch filter is user-configurable for Y/C separation in composite mode. All modes have 2X 8:4:4 input oversampling. An output jitter VCXO reduces 270 Mbps jitter down to 2 Hz. Full video proc control with user memory allows adjustment of white level, black level, color gain, and color phase.

The 9031 provides analog-to-SDI conversion for HD and SD sources, with 12-bit conversion bit depth. The 9031 includes a full proc control (with user memory) that allows adjustment of white level, black level, color gain, and color phase. Also included is AFD code insertion. Factory presets enable a return to factory settings.

The 9032 provides analog-to-SDI conversion for HD and SD sources, with 12-bit conversion bit depth. Also included is frame sync with user video/audio timing offset controls. The 9032 includes full proc control, frame sync controls, and AFD code insertion – all with user memory. Frame sync can be used to delay the video. Factory presets enable a return to factory settings.