Cheetah 144NE: 144x144 3G-SDI for coax or fiber optic cables Cheetah 144NE: 144x144 3G-SDI for coax or fiber optic cables

DESCRIPTION: Cheetah 144NE (144x144)
PESA’s Cheetah 144NE Fiber Router System is a high performance, modular fiber optic switch system for either ProAV or Broadcast HD-SDI and 3G-SDI applications. Cheetah 144NE Fiber is expandable in sizes from 36X36 up to 144X144 in the same 4RU frame. It is fully compatible with the new Vidblox Series of fiber media extenders for DVI, HD-SDI, and 3G-SDI. The frame supports redundant power, control, and a hot-swappable 144X144 Crosspoint matrix. I/O cards allow easy expansion in groups of 36 inputs or 36 outputs per card which simplifies future expansion without the need to replace cards or frames. The frame system is based on the field proven Cheetah line of routers and maintains the same high reliability always found in the PESA brand. The system’s integrated Matrix Frame Controller monitors the health of the unit and automatically recognizes any new I/O cards.

Your rack space may be limited but that’s no reason to not think big

Taking advantage of a small 4RU footprint, the Cheetah 144NE Fiber Router can be configured as a partially loaded frame allowing for easy future field expansion. Start out with a 36x36 system and build up to a full 144x144 without changing the frame or internal hardware.

Reduce system bottlenecks with integrated easySFP modules

The Cheetah 144NE frame is a modular design featuring eight input card slots and eight output card slots (I/O). Each I/O card includes small form-factor pluggable (SFP) cages supporting up to 36 signals on each card. Once the cards are installed, systems can be configured with a variety of optional SFP modules supporting fiber optic connections, mini-HD BNC connections, NSTC/PAL to SDI, or SDI to NTSC/PAL.  The easySFP fiber modules are based on 1310nm singlemode lasers but can be used in multimode applications with reduced performance specifications. Singlemode fiber allows signal transports up to 10Km while multimode is limited to approximately 600m with 50/125 cables.  In mixed cabling designs where fiber and coax are needed, then mini-HD BNC modules can be inserted in place of the fiber modules. Each mini-HD BNC easySFP allows two port per modules supporting SD-SDI, HD-SDI, and 3G-SDI.  The I/O card flexibility keeps pace with maintaining legacy hardware alongside the latest digital technology with the easySFP NTSC/PAL to SDI modules. For instance, one input card could be configured to support Fiber, BNC, and NTSC/PAL in any combination of 36 channels.

Ensuring 24/7 uptime means having systems with redundant, easily replaceable components.

The Cheetah 144NE Fiber Router relies on PESA’s proven high-performance 3500PRO or PERC 2000 System Hardware. For specialized control requirements the frame can be controlled via many third-party control systems such as HRS, Crestron® or AMX® controllers. Each 144NE frame includes a full package of PESA’s Cattrax network management software allowing a full range of setup features, diagnostics management windows, and active switching and testing features.

When it comes to getting high-caliber content to air depend on PESA’s full line of control panel options

To complete the control of end-to-end switching PESA’s full line of RCP control panels provide users with a wide range of control panel options. Pushbutton panels in the RCP line include X/Y, multi-bus, or standard pushbutton panel. In addition to standard hardware panels, users can now incorporate PESA Cattrax Web package allowing full Source/Destination switching using common network based browsers such as IE, Chrome, or Firefox.

PESA is the first to provide visionary quality for DVI/VGA over fiber using HD-SDI and 3G-SDI transports.

Combine the Cheetah 144NE with Vidblox extenders to get a full 144x144 DVI or VGA matrix switcher. Vidblox units let A/V professionals easily and economically scan convert, extend, scale, distribute and transport computer-based content to or from SMPTE compliant broadcast serial digital devices over long distance fiber or coax connections. Vidblox can solve a number of integrator A/V challenges with a single inexpensive, easy-to-use device. Both the transmitter (TX) and receiver (RX) can support fiber and coax in the same box making them a very cost effective solution when multiple signals need to be distributed from one device. High end scan converters and audio embedders typically add considerable cost to any system integration design when multiple units are required.  Until now, you have been forced to purchase different devices to perform multi-task requirements. PESA’s Viblox products solve this challenge with a full set of features normally found in high end products - but at a much lower cost point-per-device. Vidblox provides high-end features, unmatched quality, and simplicity of setup necessary for any system integrator, broadcaster, or live even operator

OVERVIEW OF THE 144NE CHEETAH FRAME

A Full range of formats supported - Input and output cards are available for fiber, mini-HD coax, and A/D or D/A options. The cards can be mixed in groups of 36 input or output channels. Signal formats supported include DVB/ASI, SD-SDI, HD-SDI, 3G-SDI, and serial data streams from 270Mbps up to 3Gbps.  Additionally, signal formats for DVI, VGA, RGsB, RGBHV and YPbPr are handled with our external Vidblox transmitter and receiver modules.  Other features include easySFP modules to support mini-HD BNC’s for SD/HD/3G, Analog NTSC/PAL to SDI, SDI to Analog NTSC/PAL, and HDMI/DVI-D ouputs.

All inputs feature auto-equalization and auto-rate sensing.  The digital output cards support reclocking on all outputs and can be set for bypass if reclocking is not required. DVB-ASI is fully supported on every path. Sync reference inputs accept analog black burst in NTSC or PAL formats as well as high definition Tri-level sync.

Designed for less space, less cost and lower total cost of ownership - PESA’s Cheetah line of routing switchers combines the latest in robust technology with the flexibility required to future proof your investment in large-scale, multi-format, and expandable routing needs. PESA continues to lead in signal routing with Cheetah’s ability to offer the widest range of frames and card configurations. Designed to support high-quality routing 24/7, Cheetah routing switchers are well suited for government, military, broadcast, mobile, telco, and corporate applications where large numbers of signals need to be switched.

High density design with efficiency in mind - All Cheetah frames are designed to operate in the toughest environments and are well suited for mobile truck applications or military tactical operation centers (TOC). Each frame features hot-swappable modules for easy service and all modules employ the latest in digital technology for low power consumption. All Cheetah routers incorporate redundant, load-sharing power supplies and feature a superior air flow design for even cooling across all critical components - insuring longer life and preventing board-level failures.

High Reliability for mission critical applications – Input and Output modules support sixteen ports per card, thus limiting the number of signals that can be affected by a single module. Since 2001, Cheetah systems have been designed around architecture to support mission critical applications. Support for redundant power and redundant control are key elements of the frame package allowing users to easily swap over to backup systems without taking down the entire system.

System Flexibility to support all broadcast digital formats from 143Mbps to 3Gbps – By offering a flexible crosspoint architecture, Cheetah can support signals from 143Mb/s up to 3Gb/s and can support any broadcast standard including DVB-ASI, SD-SDI, HD-SDI, and 3G-SDI in either optical or copper formats.

 Frame Expansion to scale on your schedule and budget – By using a modular approach to inputs and outputs, each Cheetah frame can be configured in non-square and square configurations as low as 36X36. This modular approach provides excellent in-service expansion without requiring complex and expensive frame swap-outs.

Comprehensive Control – All of PESA’s routing systems are controlled by the most flexible and comprehensive router control system available. Cheetah frames provide internal slots for up-to two system controller cards providing complete connectivity control to every input and output. Users can easily control the router system from any number of remote control panels or through the Cattrax network control software. Cheetah frames can be configured by many 3rd party control devices such as Crestron, AMX, or other types of automation system via serial or network connectivity.

 Internal Monitoring and Diagnostics – The Cheetah frame provides unmatched performance for signal management and diagnostics. Smart navigational tools allow quick preview of system performance, power supply voltages, interior temperature, and fan speed.

I/O cards sets available for Cheetah 144NE:

Mini-HD BNC SD-SDI, HD-SDI, 3G-SDI Input Card

36 Channels of SD/HD/3G-SDI or Mult-rate signals from 143Mbs to 3Gbs. Equalization to 100m for SMPTE 292M or 80m for SMPTE 424M. Supports SDI and ASI signal data rates.

Mini-HD BNC SD-SDI, HD-SDI, 3G-SDI Output Card

36 Channels of SD/HD/3G-SDI or Multi-rate signals from 143Mbs to 3.0Gbs. Supports SMPTE 424M, SMPTE 292M and SMPTE 259M reclocking standards of 143, 177, 270, 1.485Gbs, and 2.97Gbs. In addition non-standard signals from 143Mbs to 3.0Gbs are supported. With Cattrax software, each channel can be selected to turn on/off reclocking.

Fiber SD-SDI, HD-SDI, 3G-SDI Input Card

36 Channels of SD/HD/3G-SDI or Mulit-rate signals supporting SMPTE 424M, SMPTE 292M or SMPTE 259M data rates. Allows for either singlemode or multimode cabling. Modules are SFP (small form factor pluggable) supporting 1310nm wave lengths. Optional wave lengths are supported on special order. Connector type is small form factor LC.

Fiber SD-SDI, HD-SDI, 3G-SDI Output Card

36 Channels of SD/HD/3G-SDI or Multi-rate signals supporting SMPTE 424M,SMPTE 292M or SMPTE 259M data rates. Allows for either singlemode or multimode cabling. Cards can be set to support reclocking or non-reclocking modes. Modules are SFP (small form factor pluggable) supporting 1310nm wave lengths. Optional wave lengths are supported on special order. Connector type is small form factor LC.

NTSC/PAL to SDI Conversion Modules and plug-in card – up to 16 channels per card

With easySFP modules for NTSC/PAL to SD-SDI conversion, up to 16 channels of analog video can be converted to SD-SDI at 270Mbps. Incoming sources from NTSC/PAL can be transmitted as SDI sources for SMPTE 259.

SDI to NTSC/PAL Conversion Modules and plug-in card – up to 16 channels per card

With easySFP modules for SD-SDI to NTSC/PAL, up to 16 channels of SDI signals can be converted to NTSC/PAL for legacy playout to monitors or tape machines.