SD/HD/3G and HDMI(DVI-D) input H.264 Encoder

Convert your SD/HD/3G or HDMI Signals into an H.264 Stream H.264 (MPEG-4 Part 10/AVC) hardware compression and PESA’s optimized transmission technology provide a high definition, full frame rate, IP video stream. The stream can be viewed by an unlimited number of clients on a LAN or WAN provided that bandwidth is available. Image resolutions are configurable to 720p or 1080i at 50 or 60 frames per second or 1080p at 24 frames per second. The video bit rate can be configured from 4 to 18 Mbps. The audio compression is either AAC (128 to 512 kbps audio encoding) or MPEG-1 Layer 2 (64 to 384 kbps audio encoding) with up to 48 kHz sample rate. Video Inputs The PRO-H264E includes one BNC connector for HD-SDI input, and one HDMI input (DVI-D with optional adaptor cable) for connecting video and audio source equipment. Audio Inputs A terminal block connector provides audio inputs for Balanced and Unbalanced connections. This allows for easy onsite connections regardless of the cabling outputs of the audio source. There are also two RCA audio connectors (L/R) which support only unbalanced connections, and the HDMI input carries audio as well. The PRO-H264E can also extract embedded audio from the HD-SDI input. External Device Connections The PRO-H264E includes a serial connection via an RJ-45 connector. This connector can be used as an RS-232 port (fullduplex, no hand shaking) or as an RS-422 (full-duplex) port. These ports allow the PRO-H264E to interface with external devices such as terminal emulation equipment. Management & Configuration Setup and configuration of the device is accomplished by any of three methods: Console menus, a Web interface, or TCP/IP, HTTP and other Internet-related protocols are supported.