LOADING IMAGES

TX1 & TX05 FM Transmitters

THE TX 1 AND TX 05 ARE REALLY INNOVATIVE FM TRANSMITTERS WITH 1000W AND 500W OUTPUT POWER RESPECTIVELY. THANKS TO THE NEW SOLUTIONS THAT OUR ENGINEERS HAVE IMPLEMENTED IN THECIRCUITRY AND TO THE COMPACT DESIGN, FOR THESE TRANSMITTERS WE HAVE ESTIMATED A 20% LONGER MTBF WITH RESPECT TO THE AVERAGE SIMILAR MODELS AVAILABLE IN THE MARKET. THE TX 1 AND TX 05 ARE EQUIPPED WITH A MICROPROCESSOR BOARD THAT ALLOWS THE PROGRAMMING LOCALLY OR REMOTELY BY WEB (SNMP PROTOCOL). THANKS TO THE ULTIMATE ELECTRONIC COMPONENTS THAT HAVE BEEN LARGELY IMPLEMENTED IN THE DESIGN, THE OVERALL SPECIFICATIONS NOW ACHIEVED, SET TX 1 AND TX 05 AS “TOP CLASS EQUIPMENT”.

Liên hệ

THE TX 1 AND TX 05 ARE EQUIPPED WITH A MICROPROCESSOR BOARD THAT ALLOWS THE PROGRAMMING LOCALLY OR REMOTELY BY WEB (SNMP PROTOCOL). THANKS TO THE ULTIMATE ELECTRONIC COMPONENTS THAT HAVE BEEN LARGELY IMPLEMENTED IN THE DESIGN, THE OVERALL SPECIFICATIONS NOW ACHIEVED, SET TX 1 AND TX 05 AS “TOP CLASS EQUIPMENT”.

· SOLID STATE AMPLIFIER WITH MOSFET TECHNOLOGY.

· OUTPUT POWER ADJUSTABLE FROM 100W TO 1000W

· USER FRIENDLY FOR MONITORING AND CONTROL

· DOUBLE STAGE POWER SUPPLY

· FAST AND MULTIPLE PROTECTIONS

· COMPACT AND MODULAR DESIGN FOR QUICK AND EASY MAINTENANCE

· FLEXIBLE TELEMETRY SYSTEM AND REMOTE CONTROL

· N+1 HARDWARE AND SOFTWARE CONTROL FACILITY

FREQUENCY

Range: 87,5 ÷ 108 MHz

Internal Setting mode: 10 KHz steps

External Setting mode: 10 KHz steps by remote control RS232-RS485

Generation: PLL synthesizer

Control: Microprocessor

Output frequency stability: ± 300 Hz / 3 months

Reference: TCXO 12,8 MHz

Nominal deviation: ± 75 KHz

Stability of Frequency Deviation: ± 2,5 % over 6 months

Impedance RF Connector: 50 Ohm

RF OUTPUT SPECIFICATIONS

Harmonics suppression: < - 75 dBc

Spurious Emission: < - 90 dBc

Of Lock Attenuation: > 60 dBc

S/N RATIO (weighted): > 73 dB (referred to ± 75 KHz)

THD: 0,10%

VSWR: Less then 1,5:1

Probe: BNC connector RF – 40 dB, BNC connector LF

MONO MPX SPECIFICATIONS

Mono/MPX Impedance: 600 Ohm bal. or 10 KOhm unbal., XLR female Connector

Mono Level From: - 6 to + 12 dBm

MPX Level: - 6 dBm

Audio Filter Response: > 30 dB (from 19 KHz to 100 KHz)

THD: < 0,2% From 40 Hz to 15 KHz

Suppression of 19 KHz: > 46 dB

RDS and SCA Impedance: 10 KOhm unbal., BNC Connector (with 30 Hz to100 KHz Filter)

STEREO SPECIFICATIONS

Left, and Right Impedance: 600 Ohm bal. or 10 KOhm unbal, XLR female Connector

Left, Right Level: From – 6 to + 12 dBm

Crosstalk: > 50 dB (@ 19 KHz)

THD on Encoded channels: < 0,3 % From 0,4 Hz to 15 KHz

Suppression of 38 KHz: > 50 dB

Spurious suppression outside band: According to ETSI 300-384

Sub Carrier Generation: Internal Cristal

Pilot Frequency: 19 KHz ± 1 Hz

DESIGN DATA

Type: Solid state direct FM frequency

Pre –emphasis: Flat or 75 or 50 μs

Audio frequency response: ± 0,2 dB (from 40 Hz to 15 KHz) (stereo)± 0,3 dB (from 40 Hz to 100 KHz) (MPX)

Unbalance rejection: > 40 dB

Modulation Type: Direct VCO frequency modulation F3E/F8E

Capability: Meets or exceeds all CE 99/ 05 R&TTE requirements

Digital Input: AES/EBU

REMOTE CONTROL

LAN: WEB Broser by TCCP/IP, SNMP Protocoll ( RJ45 )

RS232: Software Remote Controller by GSM Modem (DB9f )

RS485: Internal BUS connection for syste connectivyity(DB9 in&out)

Parallel: A I/O DB15

STANDARDS COMPLIANCE

Radio spectrum: ETSI 300-384; ETS 302-018

EMC: ETSI 300-447; ETS 301-489

Safety: EN 60950 - EN 60215

TEMPERATURE

Operating range: 0° to 45° C

Storage range: - 40° to 60° C

Maximum relative Humidity: 90% non condensing

Max Operating Altitude: 2500 mt. a.s.l.