SDI Xtreme6G+

• Low fiber footprint – cost saving and easy to integrate

  - Extend four SD/HD-SDI signals or two 3G-SDI over a single fiber

• Modules are space saving and flexible

  -Small form factor – each module is ¼RU

  - Modules and optics are hot-swappable

• High performance

  - Industry leading bandwidth - 6.25Gbps

  - Synchronized signals

  - No data loss

  - No compression

• RS-422 for control

• Full family of compatible 6.25Gbps routers

  - VX Routers, scalable from 5 to 640 ports

  - MX Router, compact 3RU chassis, scalable from 16 to 48 ports

Operating Temp.: 0°-50°C; (32°-122°F)
Humidity: 5-95% RH, non-condensing 
Dimensions: 
Height:1.592” (40.43 mm)
Depth: 6.366" (161.69 mm)
Width: 3.693” (93.80 mm)
(tolerance: ± .039"; .1000 mm)
Weight: 1.5 lbs (0.68 kg) per unit
Shipping Weight: 9 lbs (4.08 kg)
Power Consumption: 10 watts per plug-in module
Optical Cable: Single-mode and multi-mode over one or two fibers, second fiber required for RS-422
Fiber is available, not supplied
Optical Distance:
Up to 50 meters using 62.5/125um, type OM1
Up to 350 meters using 50/125um, type OM2
Up to 750 meters using 50/125um, type OM3
Up to 1000 meters using 50/125um, type OM4
Up to 40 kilometers using 9/125um, type OS2 (single-mode)
Compliance: Approvals for US, Canada and European Union
Warranty: 12 months from date of shipment -  Extended warranties available
 

TRANSMITTER Specifications (Individual Interface Component):

Number of SDI Inputs:
2 when used as two 3G-SDI inputs
4 when used as four SD/HD-SDI inputs
Data Rate Range: 270Mbps to 2.97Gbps
Supported Standards: SMPTE  424M, 292M, 259M, 372M and 425 level A and B compliant
Re-clocked Data Rates: 270Mbps (SMPTE 259M), 1.485Gbps (SMPTE 292), 2.97Gbps (SMPTE 424M)
Equalization: Automatic up to 140m of Belden 1694A at 3.0Gbps, 230m at 1.485Gbps and 350m at 270Mbps 
Return Loss: >10dB up to 2.97Gbps
Number of Loop Outs:    
2 when used as two 3G-SDI inputs
0 when used as four SD/HD-SDI inputs 
Number of Optical Outputs: 1      
Signal Level: 800mV ± 10%                                                                          
DC Offset: 0V ± 0.5V                                                                                  
Overshoot: < 10% of amplitude                               
Timing Jitter: < 0.2 UI at 270Mbps; < 1.0 UI at 1.485Gbps; < 0.2 UI at 2.97Gbps with color bar signal
Alignment Jitter: < 0.2 UI at 270Mbps; < 1.0 UI at 1.485Gbps; < 0.3 UI at 2.97Gbps with color bar signal
Rise/Fall Time: < 135 ps at 2.97Gbps per SMPTE 424M; < 270 ps at 1.485Gbps per SMPTE 292; 0.4 ns to 1.5 ns at 270Mbps per SMPTE 259M
Re-clocking: At 270Mbps, 1.485Gbps & 2.97Gbps

Optical Fiber Output
Connector: LC 
Fiber Type:                       Multi-Mode    Single Mode
Wavelength (nominal):      850nm          1310nm 
Emmiter Type:                  VCSEL           DFB Laser
Output Power (nominal):   -4dBm           -1.5dBm 
 

RECEIVER Specifications (Individual Interface Component):

Number of SDI Outputs:
2 when used as two 3G-SDI outputs
4 when used as four SD/HD-SDI outputs
Signal Level: 800mV ± 10%                                                                               
DC Offset: 0V ± 0.5V                                                                                        
Overshoot: < 10% of amplitude                                     
Timing Jitter: < 0.2 UI at 270Mbps; < 1.0 UI at 1.485Gbps; < 0.2 UI at 2.97Gbps with color bar signal 
Alignment Jitter: < 0.2 UI at 270Mbps; < 1.0 UI at 1.485Gbps; < 0.3 UI at 2.97Gbps with color bar signal
Rise/Fall Time: < 135 ps at 2.97Gbps per SMPTE 424M; < 270 ps at 1.485Gbps per SMPTE 292; 0.4 ns to 1.5 ns at 270Mbps per SMPTE 259M
Re-clocking: At 270Mbps, 1.485Gbps & 2.97Gbps

Optical Fiber Input
Connector: LC 
Fiber Type:                        Multi-Mode       Single Mode
Wavelength:                      770 – 860nm    1260 - 1360nm
Minimum Input Sensitivity:  -12dBm           -15dBm
Maximum Input Power:       0 dBm              0.5dBm