LOADING IMAGES

HD/SD MPEG IP iMux Stream Multiplexer

The D2iMux is a cost effective HD/SD MPEG digital video IP stream multiplexer that transforms services from ASI and Gigabit Ethernet into a tailored transport stream ready for distribution over ASI, IP and SMPTE-310. Service components from any input can be used to create each output for true flexibility in building your own MPEG-2 or MPEG-4 services.

Liên hệ

Features •PSIP table management, service filtering and remapping. •Service aggregation and local program insertion. • Transport Stream (TS) grooming and remultiplexing of any service received over ASI or Gigabit Ethernet. •IP output for transporting digital video content over IP networks. •Converts up to 8 IP Streams to ASI providing a full duplex network video gateway. •Network jitter correction and adaptation for transport of MPEG TS over IP.

ASI Inputs •Two ASI BNC female inputs, 75Ω •213 Mbps per input •Receive MPTS and SPTS with service filtering ASI Outputs •Two independent ASI BNC outputs •Output up to 213 Mbps constant bit rate •Programmable unique MPTS or SPTS •PCR regeneration Gigabit Ethernet • One independent Gigabit Ethernet (GIGE), RJ45 •1000Base-T •Half and full duplex •Combines up to 8 unique IP streams. •Input and output unique SPTS and MPTS • IP/UDP and IP/UDP/RTP multicast or unicast Transmission (IGMP) •PCR regeneration SMPTE 310 Output (Option) •One SMPTE 310 BNC output at 19.39Mbps •Programmable unique MPTS or SPTS •PCR regeneration Management •Control over Ethernet 100BaseT, RJ45 •D2Manage control application for MS Windows XP, 2003, 2008, Vista, and 7 Interoperability • Video Formats: Transport stream MPEG-2 SD/HD and MPEG-4 (AVC) SD/HD •Audio Formats: MPEG-1 Layer II and Dolby AC-3 service type control MPEG Processing •Service and component PID filtering and remapping • Advanced component/service/TS analysis and bit rate measurements •Pass-through of scrambled services on TS level. •Local and remote logs PSIP Processing •Pass-through of dynamic PSIP tables and regeneration of static PSIP. •PSIP Tables Supported: PAT, PMT, CAT, SDT, NIT •ATSC Tables Supported: MGT, VCT, STT, RRT •Please see our D2Guide product for generation of dynamic PSIP Multiplexing •Service and component remapping (route any input to any output port) • Each output (ASI, GIGE, SMPTE-310) is programmed uniquely •PCR de-jittering and re-stamping • PAT/PMT computation and insertion •Synchronization of data and video •Configurable packet format of 188 or 204 bytes per packet Physical Characteristics •Size: 1.75” high x 9.80” wide x 5.25” deep • Power: 110V/220V, 50/60Hz Single external power supply Environmental Conditions • Convection cooled (no fans) • Operating Temperature: 5˚C to +40˚C • Storage Temperature: -5˚C to +45˚C • Maximum Humidity: 90% (non-condensing) Ordering Information •D2iMux 5400: IP Stream Multiplexer supporting up to 4 unique input streams •D2iMux 5401: IP Stream Multiplexer supporting up to 4 unique input steams and 1 SMPTE-310 output •D2iMux 5800: IP Stream Multiplexer supporting up to 8 unique input streams •D2iMux 5801: IP Stream Multiplexer supporting up to 8 unique input streams and 1 SMPTE-310 output