BrightEye 94 is a standard definition aspect ratio converter. You can easily convert signals from 4:3 to SD 16:9, and vice versa.
All vertical interval data and closed captioning are faithfully passed. Sixteen channels of embedded audio are supported. If the incoming video has embedded audio, the audio will be safely bypassed around the video processing and lipsync will be preserved. An external reference input allows genlock to a house reference.
Input selection, gain control, and test pattern controls are provided through the front panel interface. Audio presence LEDs indicate which channels are detected. Controls for crop, letterbox and pillarbox are accessed from the front panel or BrightEye BrightEye Mac or PC software. A special Mirror Output Mode can be enabled, causing the output image to be flipped left to right for use with on-camera talent.
SD ARC
Timeable output
HDMI output
Frame Sync
12 and 16 bit processing
Analog Video Input
Number: One
Type: Analog Composite PAL or NTSC
Resolution: Digitized at 12 bits
Impedance: 75 Ω
Return Loss: >40 dB
Input DC: +/-1 volt DC
Input Hum: <100 mV
Serial Digital Input
Number: One
Signal Type: 270 Mb/s SD Serial Digital (SMPTE 259M)
Impedance: 75 Ω
Return Loss: >15 dB
Max Cable Length: 300 meters for 270 Mb/s
Analog Video Output
Number: One
Type: Composite PAL or NTSC
Return Loss: >40 dB
Output DC: <100 mV
Reference Input
Number: One
Type: 1 V p-p Composite Video PAL or NTSC or Tri-Level Sync
Impedance: 75 Ω
Return Loss: >40 dB
Serial Digital Output
Number: Two
Type: SD Serial Digital 270 Mb/s SMPTE 259M-C
Processing: 12 and 16 bit
Impedance: 75 Ω
Return Loss: >15 dB
Max Cable Length: 300 Meters
Monitor Output
Number: One
Connectorization: HDMI
Audio Monitoring: Output
Number: One (select from eight channels)
Connectorization: 3.5 mm stereo mini jack
General Specifications
Size: 5.625” W x 1.7” H x 5.5” D (143 mm x 40 mm x 140 mm) including connectors
Power: 12 volts, 7 watts (100-230 VAC modular power supply)