LOADING IMAGES

9066 Upconverter with Analog/SDI Input, Audio Embed/De-Embed, Frame Sync, Timecode and Closed Capti

The 9066 offers upconversion (including analog-to-digital conversions using 12-bit conversion depth), SD-SDI and analog video inputs, video proc, full audio embed/de-embed, crosspoint, and level control (with analog and AES discrete audio inputs), and frame sync with video/audio offset. The upconverter allows upconversion to several HD formats, or can pass SD video without conversion.

Liên hệ

The 9066 also provides AFD functions that detect the incoming AFD code, allow independent custom ARC to be applied for each incoming AFD code, and set the desired AFD code to be inserted on the output, even if there is no code detected on the input. Closed captions and timecode are preserved through up conversions. CC data is decoded from line 21 and inserted into the SDI stream on a user-selectable line. The 9066 provides full user remote and card-edge proc control (with user memory) that allows adjustment of gain, offset, saturation/hue, audio levels, audio routing, frame sync, and many other controls. Factory presets enable a return to factory settings.

9066 Options

Audio Mixer (+AMx)
Loudness Meter (+LM)
Linear Acoustic Upmixer (+UM)
LTC In/Out (+LTC)

SD analog and digital inputs	Differential analog video inputs for power hum rejection
5-Line adaptive comb filter for SD-Composite mode	Upconversion and aspect ratio conversion
Detail enhancement and noise reduction	Selectable safe action, safe title, and center cross overlays
Analog and AES audio inputs and AES output	24-bit analog audio conversion
24-bit audio embedding or de-embedding	Audio channel mapping, downmixing, and level control
Audio offset adjustment for lip-sync alignment	Audio embed adaptive SRC allows asynchronous 48 kHz AES audio to automatically sync with card 48 kHz timing for glitch-free AES embedding
Frame sync with up to 13 frames of user adjustable delay	Closed captioning support and flexible timecode processing
AFD code insertion and AFD ARC control	16 user presets
Remote control/monitoring via Dashboard ™ software or OGCP-9000 remote control panels	Timecode insertion/conversion. +LTC option allows LTC input/output on shared port, with bi-directional conversion between VBI and LTC on RS-485 or any audio I/O

Electrical Power: 23 watts	HD/SD-SDI Input Number of Inputs: 1 Standard: SMPTE 292 and 259M Return Loss: >15 dB at 5 MHz - 1.485 GHz
Analog Video Input HD Standard: YPbPr or RGB SMPTE SD Standard: Composite, Y/C or Component (YPbPr BetaCam™, MII™ or SMPTE/N10) Impedance: 75 Ω	AES Input Number of Inputs: 16-Ch unbalanced BNC (nominal 48 kHz only) Impedance: 75 Ω Input Level: 0.1 V to 2.5 V p-p (5 V p-p tolerant) Resolution: 24-bit
Analog Audio Input Number of Inputs: 8-Ch balanced Signal Level: up to +24 dBu Sample Rate: 48 kHz	Reference Video Input Number of Inputs: 2 looping (openGear® frame) Standard: Tri-level sync (SMPTE 274) and black burst (NTSC and PAL)
Processing A/D Converson: HD: 4:4:4 SD: 8:8:8 Quantization: 12-bit A to D and 10-bit video data path SD Comb Filter: 5-line adaptive Freq. Response: HD: Y - 0-25 MHz +/- 0.3 dB HD: Pb, Pr 0-13.5 MHz +/-0.3 dB SD: 5.2 MHz +/- 0.25 dB	AES Output Number of Outputs: 16-Ch unbalanced BNC Impedance: 75 Ω Sample Rate: 48 kHz Resolution: 24-bit
HD-SDI Output Number of outputs: 2 Standard: SMPTE 292 and 259M Signal Level: 800 mV nominal Return Loss: >15 dB at 5 MHz - 270 MHz >12 dB at 270 MHz - 1.485 GHz Jitter: HD: < 0.15 UI SD: < 0.10 UI Embedded Audio: 16-Ch SD/HD